Tired of prints failing because they won't stay on the plate? Bambu Lab Liquid Glue is made for Bambu Lab build plates and works with PLA, PETG, PET, ABS, ASA and TPU, so your first layer stays put from start to finish.
Why you'll want it
-
Strong, reliable adhesion: Holds your model firmly through the whole print to stop warping and lifted corners, then lets go cleanly once the plate cools.
-
Rinses off with water: No scraping or sticky buildup. Wash the plate and the bottom of your print with plain water.
-
Even coverage: Spreads more evenly than a glue stick for consistent grip across the whole bed, not patchy spots.
-
Safe and low odour: Environmentally friendly formula that's safe to handle and far less smelly than typical adhesives.
How to use
-
Press the applicator head onto the plate to open the valve.
-
Spread a thin, even layer over your print area.
-
Print as usual.
-
When done, rinse the plate and the model base with water.
Tips for best results
-
One thin, even coat is enough. Extra layers won't improve adhesion.
-
No need to squeeze the bottle hard; light pressure does the job.
-
If a filament still isn't sticking well, try raising your bed temperature slightly.
Get yours at Bearly.sg, your local source for Bambu Lab filament and the accessories that help every print stick the landing.